• FAQs
• Labels

Labels

• What is the minimum order quantity for labels?

  We offer custom label samples starting at just 10 units per design. For custom rolls, the minimum order required is 50.

• Can you make the border on roll labels smaller?

  Our manufacturing process requires borders on roll labels to be 1/16". Currently, we're not able to make borders smaller.

• Can I have more than one design on roll?

  Currently, we are only able to produce 1 design per roll.

• How thick are your custom labels?

  Our custom labels are made from a BOPP material that's approximately 5.1 mil (130~ microns). Keep in mind, mil is not short for millimeter. Mil is a commonly used measurement for products like lab...

• Do you print stickers on a roll?

  Yes, we offer custom roll labels. Currently, we offer them in clear, circle, oval, die cut, rounded corner, square, and rectangle along with a variety of sheet options.

• Are your labels weatherproof?

  Yes, our custom labels feature a laminate that makes them waterproof and resistant to sunlight. They'll hold up great even in a dishwasher. Related FAQ: What kind of finish do your labels have?

• What kind of adhesive do labels have?

  Our custom labels have a permanent adhesive.

• What kind of finish do your labels have?

  Our custom labels have a luster UV finish. They feature a laminate that makes them waterproof and resistant to sunlight. They'll even hold up great in the dishwasher!

• How much of a bleed is required?

  We require a minimum bleed of 1/16" on our custom labels. However, if you prefer full bleed printing, that's doable too. Just let us know your preference in your instructions when checking out. ...

• Do you sell custom labels?

  Yes, we sell custom labels. We currently offer 5 common shapes (circle, square, rectangle, oval and rounded corner labels) as well as die cut roll labels cut to any shape you choose.

• Can you perforate labels?

  Currently, we do not offer perforated labels.

• What sizes and shapes are offered for labels?

  We offer the following label shapes: Die cut labels (custom shape) Circle labels Rectangle labels Square labels Oval labels Rounded corner labels All labels can be ordered in any size between ...

• Stickers vs labels - what's the difference?

  While seemingly similar, stickers and labels are unique both in their material and in their uses. Stickers are made of a premium, thick vinyl and are most often used for promotion and handed ou...

• How do I setup a sheet label?

  We'll setup your sheet labels for you. Based on your artwork, we'll arrange the sheet as best as possible.

• Are you able to print white ink on clear labels?

  Our clear labels are printed with white ink behind your design to preserve opacity. It's also possible to print your design with white ink only. However, keep in mind that your labels may be slight...

• Can I write on your clear roll labels?

  Yes, you can write on clear roll labels. We find that permanent markers and ballpoint pens work best. Depending on the type of ink used, you may need to give the ink chance to dry before using your...

• What material are your clear roll labels made from?

  Our clear labels are made from a clear BOPP material and feature a luster UV finish that resists food, oil, water & refrigeration.

• Are sheet labels laminated?

  Yes, our custom sheet labels feature a laminate that makes them waterproof and resistant to sunlight. They’ll hold up great even in a dishwasher.

• How many labels can fit on a roll?

  Our custom labels can fit a minimum of 50 labels and a maximum of 5,000 labels. The amount will vary based on the size and shape of the order.

• Are your labels UL 969 compliant?

  No, we do not know enough about the UL 969 standard to be compliant.

• What kind of adhesive do clear roll labels have?

  Clear roll labels feature a strong, permanent adhesive that is designed not to leave any glue or residue behind.

• What kind of finish do clear roll labels have?

  Our clear roll labels have a luster UV finish that resists food, oil, water & refrigeration.

• What's the length of a label roll?

  We don’t have a standard roll length. It varies depending upon how we organize the work in our queue on a given day. Consequently, the number of units per roll label can vary from order to order ev...

• Is the label material cast or non-cast?

  Both the paper and laminate for our custom labels is non-cast.

• Are clear roll labels laminated?

  No, our clear roll labels are not laminated. They have a UV finish that resists food, oil, water & refrigeration.

• Can I choose my roll label orientation?

  Yes! If you’d prefer a certain orientation on your roll labels, when your proof is ready to be reviewed select "Edit" below your proof. You can then select from the 4 orientation options.

• How many labels can I fit on a label sheet?

  The number of labels you can fit on a label sheet depends on the size of each label. No need to worry about label layout, we'll take care of formatting for you. Standard counts 1” - 18 labe...

• How thick are your sheet labels?

  Our custom sheet labels are 9.3 mils +/- 10% (0.0093 inches or 236~ microns) thick. Keep in mind, mil is not short for millimeter. Mil is a commonly used measurement for products like labels and st...

• What kind of material are your sheet labels made from?

  Our custom sheet labels are made from a BOPP material and feature a luster UV finish that resists food, oil, water & refrigeration.

• What’s the largest label size I can fit on a sheet?

  Currently, the largest label we can print per sheet is 8” x 8”.

• What kind of material are your labels made from?

  Our custom labels are printed on BOPP film. BOPP is a durable, non-toxic polypropylene commonly used for in the food, cosmetics and medical packaging industry.

• Die cut labels vs. butt cut labels

  Our die cut labels can be cut to any shape. However, all of our custom labels can be classified as “die cut”. This means each label is cut individually and there is a small gap between each label o...

• What kind of adhesive do sheet labels have?

  Sheet labels feature a permanent adhesive that’s designed not to leave any glue or residue behind.

• What is the diameter of a roll label spool?

  The diameter of the spool is 3".

• Do you offer custom label samples?

  We do! Order 10 custom label samples starting at $9 with free shipping.

• What kind of finish do sheet labels have?

  Our custom sheet labels have a luster UV finish. They feature a laminate that makes them waterproof and resistant to sunlight. They'll even hold up great in the dishwasher!

• Can you print on the background of sheet labels?

  Background printing is not available for custom sheet labels. As an alternative, check out our custom sticker sheets, which allow for full color background printing. Note there are differences b...

• What are the min/max sizes for roll labels?

  Our roll labels can accommodate custom sizes from 1" x 1" to 10" x 10".

• Can I write on your labels?

  Yes, you are able to write on our custom labels. We find permanent markers and ballpoint pens work best. Depending on the type of ink used, you may need to give the ink chance to dry before using y...

• Do you offer custom sheet sizes for sheet labels?

  Currently, we only offer 8.5” x 11” sheets.

• Can I write on your sheet labels?

  Yes, you can write on our custom sheet labels. We find that permanent markers and ballpoint pens work best. Depending on the type of ink used, you may need to give the ink chance to dry before usin...

• Do you offer clear roll label samples

  Currently, we don't offer clear roll label samples.

• Can you split rolls into custom quantities?

  Currently, we cannot. Our software automatically delegates quantities for maximum efficiency based on what is in our queue. We are working on adding support for custom spool quantities in the near ...

• How thick are clear roll labels?

  Our custom clear roll labels are 4.6 mils (0.0046 inches or 117 microns) thick. Keep in mind, mil is not short for millimeter. Mil is a commonly used measurement for products like labels and sticke...