View and download the label dispenser user manual to see a parts list.
Our label dispenser supports a roll label core diameter of either 51 mm or 76 mm.
View and download the label dispenser user manual here.
Automatic mode advances your roll automatically when a label is peeled. To activate automatic mode, press the feed button for more than 2 seconds.
You can view and download the fu…
Yes. Our label dispenser automatically switches off if not used for 5 consecutive hours.
Yes! Our label dispenser is covered by a full 2-year warranty that covers the repair or replacement of faulty parts.
You can view and download the label dispenser user manual here…
Label dispensers shipping within the US or non-European Union countries (except for the United Kingdom, Switzerland, and Norway) will include US and EU plugs.
Label dispensers shi…
The label dispenser's dimensions are: 13.4”L x 12.4”W x 11.8”H. (340 x 315 x 300 mm)
Before turning on the device, make sure that the roll is correctly loaded in the machine by following the quick start guide.
The label dispenser operates using the following voltage:
AC Input: 100-240 VAC - 50/60Hz - 1A
DC Output: 24Vdc/1.5A
View and download the quick start guide here.
The maximum label width the dispenser supports is 140 mm. The quantity of labels per roll, however, will affect this.
The maximum roll diameter the label dispenser supports is 135 mm.
Before and after you use your label dispenser, be sure to clear any dirt and dust off the machine for smooth application.
Do not clean with water.
To prevent the appliance from be…
The label dispenser weighs 4 kg.
Our label dispenser supports most roll labels up to 114 mm x 114 mm with a maximum roll diameter of 135 mm, maximum roll width of 140 mm, and a maximum weight of 2 kg.
Labels with…
The label dispenser is 340 x 315 x 300 mm.
Labels are dispensed at 0.1 m/s (0.33 foot per second).
The maximum roll weight supported by our label dispenser is 2 kg.
The device is able to adapt to different label formats (width and
length) for a perfect removal from the liner.
To adapt to the width of the label it’s possible to move
the shaft…