Magnets
-
Magnet care guide
Proper use and care of your custom magnet will help to extend the life and protect the surfaces that they are applied to. We recommend following the care guide steps below to ensure top performance...
Proper use and care of your custom magnet will help to extend the life and protect the surfaces that they are applied to. We recommend following the care guide steps below to ensure top performance. Prepare the surface Before affixing the magnet to a metal surface, be sure all surface paints, clear coats and waxes are cured (hardened). Clean the surface and the magnet with mild detergent. Wipe with a soft cloth or allow to dry. Applying the magnet Affix to smooth, flat or gently curved metallic surfaces. Make sure the entire magnet is flat against the metal surface. Do not place over protrusions (molding, decals, pin striping, etc.) or concave areas. There must be NO air pockets. The magnet itself should be at a room temperature of 60°F (16°C) or above when installed to achieve best results. Do NOT use on horizontal metal surfaces exposed to direct sunlight (such as automobile hoods), temperatures exceeding 160°F (71°C) or temperatures below -15°F (-26°C). Exposure to cold weather will make the magnet more brittle so use caution when handling. Be aware that long-term use on surfaces frequently exposed to sunlight (such as vehicles) can result in uneven fading of the surface because the magnet-covered area is shielded from ultraviolet rays. Cleaning To guard against moisture and dirt buildup between the magnet and the metal surface (particularly on outdoor applications), remove the magnet at regular intervals. Clean both the magnet and metal surface with mild detergent; wipe with a soft cloth or allow to air-dry. (For vehicle-mounted signs, remove and clean DAILY). After waxing and polishing, allow 2 days for wax to cure before applying magnets. -
How thick are your magnets?
Our custom magnets are 15 mils (381 microns) thick. With laminate and coating, the total thickness is 19 mils (482 microns). Keep in mind, mil is not short for millimeter. Mil is a commonly used...
Our custom magnets are 15 mils (381 microns) thick. With laminate and coating, the total thickness is 19 mils (482 microns). Keep in mind, mil is not short for millimeter. Mil is a commonly used measurement for products like magnets and stickers. For reference, our vinyl stickers without the liner are 7 +/- mils thick. (0.007 inches or 177.8 microns). When still on the paper backing, our stickers are 15.45 mils thick (0.015 inches or 392.43 microns). -
What is the minimum order quantity for magnets?
We offer custom magnet samples starting at just 10 units per design. If you would like to order more than 10 magnets and less than 50, add 50 units to your cart and then override the quantity to y...
We offer custom magnet samples starting at just 10 units per design. If you would like to order more than 10 magnets and less than 50, add 50 units to your cart and then override the quantity to your desired number before finishing the checkout process. -
Are your magnets suitable for cars?
Yes, our custom car magnets adhere to most cars. Depending on conditions they can last 2 - 3 years. However, we recommend sizes 102 mm x 102 mm or larger for outdoor use. Smaller magnets sometim...
Yes, our custom car magnets adhere to most cars. Depending on conditions they can last 2 - 3 years. However, we recommend sizes 102 mm x 102 mm or larger for outdoor use. Smaller magnets sometimes have trouble adhering due to the small surface area. Please note, for use on vehicles to guard against moisture and dirt buildup between the magnet and the metal surface (particularly on outdoor applications), the magnet needs to be removed at regular intervals. Clean both the magnet and metal surface with mild detergent; wipe with a soft cloth or allow to air-dry. (For vehicle-mounted signs, remove and clean DAILY.) -
Will your magnets work on my MacBook?
No, our magnets will not adhere to a MacBook. We do not recommend placing magnets on any of your electronic devices. Instead, choose our custom laptop stickers which can be removed cleanly withou...
No, our magnets will not adhere to a MacBook. We do not recommend placing magnets on any of your electronic devices. Instead, choose our custom laptop stickers which can be removed cleanly without splitting into multiple pieces. -
Are your magnets weatherproof?
Yes, our magnets are durable and will hold up to poor weather conditions.
Yes, our magnets are durable and will hold up to poor weather conditions. -
Can you make inner cuts on magnets?
Yes, we can make one inner cut as long as it's at least 6.35 mm x 6.35 mm.
Yes, we can make one inner cut as long as it's at least 6.35 mm x 6.35 mm. -
What can I put your magnets on?
The most common use for our custom magnets is on cars and refrigerators. Some other surfaces include a magnetic dry erase boards, kitchen appliances, and school lockers. Please note, our magnets...
The most common use for our custom magnets is on cars and refrigerators. Some other surfaces include a magnetic dry erase boards, kitchen appliances, and school lockers. Please note, our magnets may not adhere to specific brands of magnetic dry erase boards. Please review product FAQs to ensure the item you intend to place our magnets on does not require industrial-strength or "earth" magnets, as our magnets will not adhere to surfaces requiring industrial-strength magnets. Please see our application recommendations for use on vehicles here. -
Do you offer ribbon magnets?
All of our custom magnets can be made in any shape (including ribbons) or size. Although we don’t offer stock ribbon designs, if you have a ribbon magnet design we’ll happily print it. You'll recei...
All of our custom magnets can be made in any shape (including ribbons) or size. Although we don’t offer stock ribbon designs, if you have a ribbon magnet design we’ll happily print it. You'll receive a free proof within 4 hours and you can request changes to the look or size to your custom ribbon magnets. -
Do you offer business card magnets?
Yes, we offer business card magnets. For a standard size business card, select custom size and order 89 mm x 51 mm.
Yes, we offer business card magnets. For a standard size business card, select custom size and order 89 mm x 51 mm. -
Do you offer calendar magnets?
Yes. Although we don’t offer stock calendar designs, if you have a calendar magnet design we’ll happily print it. Our custom magnets are available in any shape and size, and in full color.
Yes. Although we don’t offer stock calendar designs, if you have a calendar magnet design we’ll happily print it. Our custom magnets are available in any shape and size, and in full color. -
How strong are your magnets?
Our magnets are 84 lbs pull per sq ft. They can hold a few pieces of paper to a magnetic surface such as a refrigerator.
Our magnets are 84 lbs pull per sq ft. They can hold a few pieces of paper to a magnetic surface such as a refrigerator. -
What magnet shapes are available?
We offer the following magnet shapes: Die cut magnets (custom shape) Circle magnets Rectangle magnets Square magnets Oval magnets Rounded corner magnets
We offer the following magnet shapes: Die cut magnets (custom shape) Circle magnets Rectangle magnets Square magnets Oval magnets Rounded corner magnets -
Are your magnets recyclable?
Although magnets are not commercially recyclable, be sure to check with your local recycling center for possible alternatives. And before tossing, always consider the options to reuse, repurpose...
Although magnets are not commercially recyclable, be sure to check with your local recycling center for possible alternatives. And before tossing, always consider the options to reuse, repurpose, and regift! -
Do you offer custom magnet samples?
We do! Try 10 custom magnet samples, with prices starting at C$12 and free shipping within the United States.
We do! Try 10 custom magnet samples, with prices starting at C$12 and free shipping within the United States. -
Are your magnets flexible?
Yes, we currently only make flexible magnets.
Yes, we currently only make flexible magnets. -
How will you package my magnets?
We shrink wrap magnets in packages of 25. Depending on the size of your order, we will either place them in a bubble mailer or cardboard box.
We shrink wrap magnets in packages of 25. Depending on the size of your order, we will either place them in a bubble mailer or cardboard box. -
What are magnet sheets?
A magnet sheet is a page with several peelable magnets. A page can have one magnet design, or multiple. Magnet sheets lie flat and store easily. They’re great for grouping magnets together in a the...
A magnet sheet is a page with several peelable magnets. A page can have one magnet design, or multiple. Magnet sheets lie flat and store easily. They’re great for grouping magnets together in a theme. Magnet sheets come in custom sizes up to 20” x 20”. The number of magnets per sheet depends on the size and shape of each design. Magnet sheets can be printed in full color and full bleed. Magnet sheets are made from the same material as our custom magnets. -
Do you make magnet sheets?
Yes, we make custom magnet sheets in any size, up to 20" x 20". Place as many magnets as you can like on your custom magnet sheet. Each magnet will be cut out for easy removal. You can upload you...
Yes, we make custom magnet sheets in any size, up to 20" x 20". Place as many magnets as you can like on your custom magnet sheet. Each magnet will be cut out for easy removal. You can upload your fully-custom magnet sheet design, or simply upload a .zip containing your designs and we’ll lay them out for you. -
Can I write on your magnets?
Yes, you are able to write on our magnets. We find permanent markers and ballpoint pens work best. Depending on the type of ink used, you may need to give the ink chance to dry before using your ma...
Yes, you are able to write on our magnets. We find permanent markers and ballpoint pens work best. Depending on the type of ink used, you may need to give the ink chance to dry before using your magnets. -
Can my magnets have an internal cut?
Yes, we allow one internal cut when ordering custom magnets. Your cut should be at least ~6.35 mm in diameter for us to accept it.
Yes, we allow one internal cut when ordering custom magnets. Your cut should be at least ~6.35 mm in diameter for us to accept it. -
Will your magnets stick to my macbook?
No, our custom magnets are not designed to be used on Macbooks or other laptops.
No, our custom magnets are not designed to be used on Macbooks or other laptops.