How do you take care of custom magnets?

A little maintenance helps your custom magnets last longer and keeps the surface underneath in good shape.

###Before you apply

Make sure any paint, clear coat, or wax is fully cured.
Wash the surface and the magnet with mild detergent, then dry with a soft cloth (or air-dry).

###Apply it correctly

Apply only to smooth, flat, or gently curved metal.
Make sure the magnet sits completely flat; don’t place it over molding, decals, pin striping, protrusions, or in concave areas.
For best hold, the magnet should be 60°F (16°C) or warmer when installed.
Don’t use magnets on horizontal metal surfaces in direct sunlight (like car hoods).
Avoid temperatures above 160°F (71°C) or below -15°F (-26°C).
Cold temperatures can make magnets more brittle, so handle with care.
Long-term sun exposure can cause uneven fading on the surface because the covered area is shielded from UV.

###Clean regularly

Remove the magnet periodically to prevent moisture or dirt buildup.
Clean both the magnet and the surface with mild detergent and dry completely before reapplying.
For vehicle-mounted signs, remove and clean daily.
After waxing or polishing, wait 2 days for wax to cure before reapplying magnets.

###If you see residue