View and download the label dispenser user manual.
View and download the label dispenser user manual here.
Automatic mode advances your roll automatically when a label is peeled. To activate automatic mode, press the feed button for more than 2 seconds.
You can view and download the fu…
Yes! The label dispenser is covered by a full 2-year warranty that covers the repair or replacement of faulty parts.
You can view and download the label dispenser user manual here…
Before and after you use your label dispenser, be sure to clear any dirt and dust off the machine for smooth application.
Do not clean with water.
To prevent the appliance from be…
The label dispenser weighs 8.8 lbs (4kg).
The label dispenser is 13.4”L x 12.4”W x 11.8”H (340 x 315 x 300mm).
The device is able to adapt to different label formats (width and
length) for a perfect removal from the liner.
To adapt to the width of the label it’s possible to move
the shaft…
The label dispenser operates using the following voltage:
AC Input: 100-240 VAC - 50/60Hz - 1A
DC Output: 24Vdc/1.5A
Our label dispenser supports a minimum core diameter of 2", and a maximum of 3".
The maximum label width the dispenser supports is 5.5". The quantity of labels per roll, however, will affect this.
The maximum roll diameter the label dispenser supports is 5.3” (135mm).
The maximum roll weight supported by our label dispenser is 4.4 lbs (2 kg).
Labels are dispensed at 0.1m/s (0.33 foot per second).
Before turning on the device, make sure that the roll is correctly loaded in the machine by following the quick start guide.
The label dispenser's dimensions are: 13.4”L x 12.4”W x 11.8”H. (340 x 315 x 300mm)
Our label dispenser supports roll labels up to 4.5" x 4.5" with a maximum roll diameter of 5.3", maximum roll width of 5.5", and a maximum weight of 4.4 lbs.
Labels with a hologra…
View and download the quick start guide here.