The label dispenser operates using the following voltage:
AC Input: 100-240 VAC - 50/60Hz - 1A
DC Output: 24Vdc/1.5A
Our label dispenser supports a minimum core diameter of 2", and a maximum of 3".
View and download the label dispenser user manual.
The device is able to adapt to different label formats (width and
length) for a perfect removal from the liner.
To adapt to the width of the label it’s possible to move
the shaft…
The maximum roll diameter the label dispenser supports is 5.3” (135mm).
Labels are dispensed at 0.1m/s (0.33 foot per second).
Before and after you use your label dispenser, be sure to clear any dirt and dust off the machine for smooth application.
-Do not clean with water.
-To prevent the appliance from…
The label dispenser weighs 8.8 lbs (4kg).
The maximum label width the dispenser supports is 5.5". The quantity of labels per roll, however, will affect this.
The maximum roll weight supported by our label dispenser is 4.4 lbs (2 kg).
Our label dispenser accommodates any label with a minimum of a 2" core.
View and download the quick start guide here.
The label dispenser is 13.4”L x 12.4”W x 11.8”H. (340 x 315 x 300mm)
View and download the label dispenser user manual here.