Skip to main content
stickermule

Sticker MuleVerifiedPRO

@stickermule followers following1.1K orders subscribers

FAQs

Yes! Custom water bottle stickers add a personal touch to your Hydro Flask®, Yeti®, Nalgene®, or whatever helps you stay hydrated! The durable vinyl is waterproof, scratch-resistant, and holds up great in the dishwasher.

·

Yes! We print custom phone case stickers so you can show off your personal style or promote your favorite brands wherever you go. Phone case stickers are durable enough to withstand scratching, sunlight, and water.

·

Yes! Our custom hang tag stickers are a unique way to create product labels or hang them in your shop to help showcase your brand.

·

Yes, our surfboard stickers will adhere to unwaxed surfboards. You should apply your stickers 24 hours prior to submerging your board in water. The adhesion becomes stronger with time so surfing immediately after applying your stickers may cause them to fall off. To our knowledge, there aren't any adhesives that work well with waxed surfboards.

·

Yes. We can print QR codes onto any custom sticker as long as the QR + artwork is at least 300 ppi or better. Just be sure to embed the code into your artwork. In order to be easily scannable, you need a white border around your QR code and we recommend making the code at least 2" in size to ensure scannability. There are some instances when we can print the QR code smaller than 2". For example, if the QR code is a very simple design, we can print smaller than the suggested 2", to our minimum size of 1". Below are examples of QR code designs ranging from simple to complex. Version 2 we could print at 1", while version 6 and 10, we would recommend a size of 2" or larger to ensure scannability. There are some design elements that will cause a QR code to be unscannable. The most common include: Added graphic elements: When graphic elements or photos are added on top of the QR code, the scanner can't determine where the QR code information is located. Low contrast: If the color of the QR code elements and the background color are too similar, the scanner can't differentiate between the two. Skewed or stretched: QR code scanners expect the code elements to be squares. The scanner cannot determine the code if it's been skewed or stretched.

·

Yes, our custom hard hat stickers have a permanent adhesive that adheres to a hard hat. With a protective laminate they are designed to withstand harsh weather conditions and are resistant to wind, rain, water, sunlight, and scratching. Smaller stickers will be easier to apply cleanly to a hard hat or helmet. Larger stickers could, depending on the surface, have creases while being applied. "I needed durable stickers for some hard hats. These were just the ticket. I went with the die cut stickers to avoid wrinkling as I put them on the curved hard hat and they worked perfectly. The proof/review process worked great. Shipping was quick. Very satisfied." —Paul Betts

·

We do not offer keyboard stickers. The smallest custom stickers we make are 1” in size, which is too large for a standard keyboard key. We recommend 4Keyboard or a similar company.

·

Yes, you can include a barcode in your custom stickers or custom labels design but we're unable to guarantee that it will be scannable. Your ability to scan a barcode will vary depending upon its size, design, scanning device quality and patience of the person doing the scanning. We recommend a minimum height or width of 0.625" (16mm). If your barcode is small we recommend placing a test order to verify how easy it will be to scan. You can order 10 custom samples starting at $9 here. QR codes are easier to scan and are a great alternative to barcodes.

·

No, we cannot print on the back side of the sticker to create a postcard. Custom kiss cut stickers however, allow you to print additional information on the front of your sticker!

·